Zack Lipira
- Total activity 99
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 60
Activity overview
Latest activity by Zack Lipira-
Zack Lipira created an article,
CSV/XML Interface - Description
RaPTr Server will monitor the directory specified by File Directory for either CSV or XML files. When RaPTr Server detects a new file, it will parse the contents of the file, store the order inform...
-
Zack Lipira created an article,
CSV/XML Interface Setup
The following section describes how to setup your RaPTr Server to use the CSV or XML interface option. 1. Launch RaPTr Server Utility 2. Enter in Username and Password 3. Select CSV or XML from the...
-
Zack Lipira created an article,
System Menu
The SYSTEM Menu contains parameters necessary for communication to RaPTr Server, as well as parameters regarding the barcode symbologies. The parameters listed in the SYSTEM Menu are essential to t...
-
Zack Lipira created an article,
RaPTr Server Data Only Interface
DESCRIPTION This interface allows for a quick determination if barcodes are reading properly without any additional set-up. In this interface, barcodes that are successfully read will get a respons...
-
Zack Lipira created an article,
Cameras Menu
To configure and diagnose each camera and lens, click the desired camera under the CAMERAS menu. Basic Settings Each camera operates on an automatic exposure and gain mode, allowing the scanner t...
-
Zack Lipira created an article,
Passive Cameras
If you have purchased a photo documentation camera (1781-CAMS-PD-XX) then you will not need to enable the camera as passive as the scanner will auto-detect that it is a photo documentation camera a...
-
Zack Lipira created an article,
Selecting Symbologies
1. From RUN MODE, press F5 or click on the RaPTr logo located in the top right corner. 2. Click the CONFIGURE button. 3. If not currently shown, navigate to the System menu by clicking the SYSTEM b...
-
Zack Lipira created an article,
Configuration Mode - Navigating, Saving, Reset
Entering Configuration Mode 1. From RUN MODE, press F5 or click on the RaPTr logo located in the top right corner. 2. Click the CONFIGURE button. NAVIGATION The right-hand side of the screen is r...
-
Zack Lipira created an article,
Run Mode and Diagnostics Overlay
When RaPTr Scanner powers on, or the software is launched, it will enter RUN MODE. While in RUN MODE, RaPTr Scanners will be looking for the configured barcodes and perform all integration function...
-
Zack Lipira created an article,
Server Configuration Utility
Configuration To configure RaPTr Server, launch the program “RaPTr Server Utility”. The first dialogue will be a login screen. The default credentials are username, “artemis” and password, “raptor”...